AAI ORIGINAL English Verison N1201SA N1201SA+ 34.375MHz-2.7GHz UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester
348
Direct purchase from the factory 
ຮັບປະກັນຄວາມປອດໄພໃນການຊຳລະ
ຂອງຂວັນຟຣີ
ນະໂຍບາຍການຈັດສົ່ງ
ນະໂຍບາຍການຄືນຂອງຂວັນຟຣີ
ຍິນດີຕ້ອນຮັບສູ່ Roymall, ເວັບໄຊທ໌ມືອາຊີບຂອງທ່ານສຳລັບການຊື້ຂອງຂວັນຫ້າງສັງຄົມຊັ້ນສູງ. ພວກເຮົາໃຫ້ຄ່າສູງ ແລະ ຂອບໃຈການສະໜັບສະໜູນຂອງທ່ານ, ແລະ ພວກເຮົາຕ້ອງການສະແດງຄວາມຂອບໃຈໂດຍການເພີ່ມຄວາມຕື່ນເຕັ້ນເພີ່ມເຕີມໃຫ້ກັບການຊື້ຂອງທ່ານ. ເມື່ອທ່ານຊື້ກັບພວກເຮົາ, ທ່ານບໍ່ພຽງແຕ່ໄດ້ຮັບຜະລິດຕະພັນຄຸນນະພາບສູງທີ່ຊ່ວຍປັບປຸງຊີວິດການເປັນຢູ່ຂອງທ່ານ, ແຕ່ທ່ານຍັງຈະໄດ້ຮັບຂອງຂວັນຟຣີທີ່ເປັນເອກະລັກກັບທຸກຄຳສັ່ງທີ່ທ່ານວາງ. ພ້ອມທີ່ຈະສຳຫຼວດຄວາມຄັກແລະຊອກຫາຂອງຂວັນທີ່ເຫມາະສົມທີ່ສຸດຂອງທ່ານບໍ? ສຳຫຼວດການເລືອກຂອງພວກເຮົາຂອງຜະລິດຕະພັນຫ້າງສັງຄົມຊັ້ນສູງ, ວາງຄຳສັ່ງຂອງທ່ານ, ແລະ ລໍຖ້າຄວາມຕື່ນເຕັ້ນຂອງຂອງຂວັນຟຣີຂອງທ່ານທີ່ຈະມາພ້ອມກັບການຊື້ຂອງທ່ານ.ນະໂຍບາຍການຈັດສົ່ງ
ພວກເຮົາຈະພະຍາຍາມຈັດສົ່ງສິນຄ້າໃຫ້ທ່ານຫຼັງຈາກໄດ້ຮັບຄຳສັ່ງຂອງທ່ານ ແລະ ໃຫ້ແນ່ໃຈວ່າພວກມັນຈະມາຮອດຢ່າງປອດໄພ. ລາຍລະອຽດການຈັດສົ່ງຈະຖືກລະບຸໃນອີເມວຢືນຢັນຂອງທ່ານ.ໃນສ່ວນໃຫຍ່, ຄຳສັ່ງຈະຖືກດຳເນີນການພາຍໃນ 2 ວັນ.ໃນສະຖານະການພິເສດ, ມັນຈະຖືກລັອກຄືດັ່ງນີ້: ເມື່ອທ່ານວາງຄຳສັ່ງໃນວັນເສົາ, ວັນອາທິດ ຫຼື ວັນພັກລັດຖະການ, ມັນຈະຖືກລັອກຄື 2 ວັນ..ປົກກະຕິ, ມັນຕ້ອງການ 5-7 ວັນເຮັດວຽກ (ຈັນຫາສຸກ) ໂດຍບໍ່ຖືກຜົນກະທົບຈາກການລັອກຂອງການບິນຫຼື ປັດໄຈສະພາບແວດລ້ອມອື່ນໆ..ເນື່ອງຈາກບໍລິການຈັດສົ່ງຂອງພວກເຮົາແມ່ນທົ່ວໂລກ, ເວລາຈັດສົ່ງຈະຂຶ້ນກັບສະຖານທີ່ຂອງທ່ານ, ສະນັ້ນມັນອາດຈະຕ້ອງໃຊ້ເວລາບາງຄັ້ງ ແລະ ກະລຸນາລໍຖ້າຢ່າງອົດທົນຖ້າທ່ານຢູ່ໃນເຂດຫ່າງໄກສອກຫຼີກ ຫຼື ປະເທດ.1. ນະໂຍບາຍການຄືນ & ແລກ
ພວກເຮົາຍອມຮັບສິນຄ້າທີ່ຊື້ຈາກ roymall.com ເທົ່ານັ້ນ. ຖ້າທ່ານຊື້ຈາກຕົວແຈກຢາຍທ້ອງຖິ່ນຂອງພວກເຮົາຫຼື ຮ້ານຄ້າອື່ນໆ, ທ່ານບໍ່ສາມາດຄືນມັນທີ່ພວກເຮົາໄດ້. ສິນຄ້າຂາຍສຸດທ້າຍຫຼື ຂອງຂວັນຟຣີບໍ່ສາມາດຍອມຮັບສຳລັບການຄືນ. ເພື່ອມີສິດໄດ້ຮັບການຄືນ, ສິນຄ້າຂອງທ່ານຕ້ອງບໍ່ເຄີຍໃຊ້ ແລະ ຢູ່ໃນສະພາບດຽວກັນກັບທີ່ທ່ານໄດ້ຮັບມັນ. ມັນຕ້ອງຢູ່ໃນບັລບັ້ງດັ້ງເດີມ.ຫຼັງຈາກໄດ້ຮັບຄຳແນະນຳການຄືນຈາກພວກເຮົາ, ກະລຸນາຫຸ້ມຫໍ່ສິນຄ້າທີ່ຈະຄືນຂອງທ່ານ ແລະ ສົ່ງແພັກເກົ່າຂອງທ່ານທີ່ຫ້ອງການໄປສະນີທ້ອງຖິ່ນຫຼື ຜູ້ຈັດສົ່ງອື່ນ.ພວກເຮົາຈະດຳເນີນການຄືນຫຼື ແລກສິນຄ້າພາຍໃນ 3-5 ວັນເຮັດວຽກຫຼັງຈາກພວກເຮົາໄດ້ຮັບມັນ. ການຄືນເງິນຈະຖືກດຳເນີນການ ແລະ ເຊື່ອມໂຍງໂດຍອັດຕະໂນມັດໄປຍັງວິທີການຊຳລະເງິນດັ້ງເດີມຂອງທ່ານ.ບໍ່ສາມາດຍອມຮັບການຄືນຫຼື ແລກຖ້າສິນຄ້າຖືກຜະລິດແບບປັບແຕ່ງ, ລວມທັງຂະໜາດປັບແຕ່ງ, ສີປັບແຕ່ງ, ຫຼື ການພິມປັບແຕ່ງ.ຕ້ອງການຄວາມຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ກະລຸນາຕິດຕໍ່ພວກເຮົາ. service@roymall.com ຫຼື Whatsapp: +8619359849471
2.ນະໂຍບາຍການຄືນເງິນ
ທ່ານຈະໄດ້ຮັບເງິນຄືນເຕັມຈຳນວນ ຫຼື ເງິນຄັງ 100% ຫຼັງຈາກພວກເຮົາໄດ້ຮັບແພັກເກົ່າທີ່ຄືນ ແລະ ກວດສອບມັນ. ການຄືນເງິນຈະຖືກດຳເນີນການ ແລະ ເຊື່ອມໂຍງໂດຍອັດຕະໂນມັດໄປຍັງວິທີການຊຳລະເງິນດັ້ງເດີມຂອງທ່ານ. ກະລຸນາສັງເກດວ່າຄ່າໃຊ້ຈ່າຍໃນການຈັດສົ່ງ ແລະ ຄ່າທຳນຽມຫຼື ຄ່າທຳນຽມໃດໆບໍ່ສາມາດຄືນໄດ້. ຄ່າໃຊ້ຈ່າຍໃນການຈັດສົ່ງເພີ່ມເຕີມບໍ່ສາມາດຄືນໄດ້ເມື່ອແພັກເກົ່າໄດ້ຖືກຈັດສົ່ງແລ້ວ. ທ່ານແມ່ນຜູ້ຮັບຜິດຊອບໃນການຊຳລະຄ່າໃຊ້ຈ່າຍເຫຼົ່ານີ້ ແລະ ພວກເຮົາບໍ່ສາມາດຍົກເວັ້ນຫຼື ຄືນມັນ, ເຖິງແມ່ນວ່າຄຳສັ່ງຈະຖືກສົ່ງຄືນມາຫາພວກເຮົາ.ຫຼັງຈາກພວກເຮົາໄດ້ຮັບ ແລະ ຢືນຢັນສິນຄ້າທີ່ຄືນຂອງທ່ານ, ພວກເຮົາຈະສົ່ງອີເມວໃຫ້ທ່ານເພື່ອແຈ້ງໃຫ້ທ່ານຮູ້ວ່າພວກເຮົາໄດ້ຮັບສິນຄ້າທີ່ຄືນຂອງທ່ານ. ພວກເຮົາຍັງຈະແຈ້ງໃຫ້ທ່ານຮູ້ກ່ຽວກັບການອະນຸມັດຫຼື ປະຕິເສດການຄືນເງິນຂອງທ່ານ.ຖ້າທ່ານມີບັນຫາໃດໆກ່ຽວກັບຂະບວນການຄືນເງິນ, ກະລຸນາຕິດຕໍ່ພວກເຮົາ. service@roymall.com ຫຼື Whatsapp: +8619359849471
Description:
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Tools, Industrial & Scientific Ranking
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
